135AH (AMP HOUR) AGM ( ABSORBED GLASS MAT ) SLA ( SEALED LEAD ACID ) HYBRID  SUITABLE FOR BOTH STARTING (UNDER BONNET HIGH TEMPERATURE RESISTANT) AND DEEP CYCLE APPLICATIONS BATTERY MODEL P/N NPC-DP-135-12 WITH FULL MANUFACTURER NATIONWIDE 5 YEAR WARRANTY + BOLT ON BRASS BATTERY POSTS

When comparing these batteries with other AGM batteries ALWAYS CHECK THE WEIGHT , a true 135ah AGM SEALED LEAD ACID BATTERY on a 10 hr rate ( always check the hour hr rate that the battery is advertised at as this is an industry standard ) MUST WEIGH AT LEAST 34kg any less than this and either the case is of lighter construction ( and therefore more suseptable to temperature and vibration ) or the plates smaller ( and therefore the ah is less ). You cannot have it both ways ( a lighter battery than 34kg and 135ah ) if it is advertised as a 135ah battery .The battery we offer here weighs 34kg.

As we sell dozens of these each week and shipments are consistently arriving , you can be assured that you are always receiving fresh stock

Always improving their batteries Power AGM are at the forefront of battery technology , only trusted well known brands will keep reinvesting in their products to bring you the end user the best batteries on the market. Due to this ongoing reinvestment these batteries have been DEVELOPED INTO A DUAL PURPOSE BATTERY WITH 135 amp hours capacity and 1000 cold cranking amps, this means this battery can be USED FOR STARTING as well as in A DEEP CYCLE AUXILIARY battery situation for fridges lights etc ( check the detailed specifications we have provided in the description ) .

The latest technology has gone into this battery and has been developed and engineered to meet the rigorous demands of HOT Australian conditions with a high temperature FR ( Fire Rated ) case and internal extra heavy duty construction for vibration in 4wd's caravans and camper trailers. These rechargeable batteries are lead-lead dioxide systems. The dilute sulfuric acid electrolyte is absorbed by separators and thus immobilized. Should the battery be accidentally overcharged producing hydrogen and oxygen, Special one-way valves allow the gases to escape thus avoiding excessive pressure build-up. Otherwise, the battery is completely sealed and is, therefore, maintenance-free, leak proof and usable in any position.

FEATURES

  • FR (Fire rated) case for high temperature enviroments such as under bonnet WITH turbo charger
  • Maintenance-Free, Non-Spillable - Proven VRLA technology guarantees safe operation without maintenance and ‘nonrestricted article’ ( road use ) status for transportation.
  • Handle - Detachable rope carry handles.
  • Low Self-Discharge - Lead-calcium alloy grids and use of high purity lead account for superior shelf-life characteristics permitting storage for extended periods of time.
  • Designed-In Reliability - Cutting-edge manufacturing and process control combined with meticulous quality assurance procedures guarantee consistent and dependable performance.
  • Absorbent Glass Mat(AGM) technology for efficient gas recombination of up to 99% and freedom from electrolyte maintenance or water adding.
  • Not restricted for air transport-comp lies with IATA/ICAO Special Provision A67.
  • UL-recognized component.
  • Can be mounted in any orientation.
  • Computer designed lead, calcium tin alloy grid for high power density.
  • Long service life, float or cyclic applications.
  • Maintenance-free operation.
  • Low self discharge.

DIMENSIONS

  • LENGTH 330 mm
  • WIDTH  175 mm
  • HEIGHT  215 mm
  • Height at terminals: 220mm ( PLUS THE BOLT THAT SCREWS IN )

SPECIFICATIONS

  • Nominal Voltage ........................................................................ 12 volts (6 cells)
  • Nominal Capacity
  • 20-hr. (5.5A 10.5V ) ........................................................ 128 AH
  • 10-hr. (10A 10.5V) ........................................................ 125 AH
  • 5-hr. (17.4A 10.5V) .......................................................... 95 AH
  • 1-hr. (63.5A 9.6V) ............................................................. 67.1 AH
  • Approximate Weight ...........................................................  34 kg
  • Operating Temperature Range
  • Charge .. ........................................................... -4°F (-20°C) to 122°F (50°C)
  • Discharge ....................................................... -40°F (-40°C) to 140°F (60°C)
  • CCA .........................................................1000
  • Case ....................................................... High Temerature ABS Plastic

We have sold and use these batteries in our workshop for quite a while now , in automotive , residential , marine and rugged 4x4 / camper trailer applications .We know batteries and value for money we believe these to be excellent.

TO DOWNLOAD THE SPEC SHEET ON THIS BATTERY CLICK HERE

THE COURIER SERVICE AND DELIVERY
As these batteries are deemed " Dangerous Goods" in the transport industry , they require specialised / approved transport , We generally use Startrack but as we ship Australia wide the freight company may vary depending on the delivery location and the timing of the dispatch and delivery in regards to the specialised / approved transport , though it will be a trackable service . There can be a delay in providing the tracking number as with these specialised shipments there is a lot more manualised processing compared to the automated processing and computer generated tracking numbers of general " Non Dangerous Goods".

 

SKU NPC-DP-135-12
Brand Power AGM
Shipping Weight 34.6000kg
Shipping Width 0.175m
Shipping Height 0.220m
Shipping Length 0.330m
Shipping Cubic 0.012705000m3
Unit Of Measure ea
Type AGM

Be The First To Review This Product!

Help other Autoelec users shop smarter by writing reviews for products you have purchased.

Write a product review