7.5M x 10mm Air Compressor Hose with Fittings

GENUINE VALLEY INDUSTRIES USA MADE 300 PSI AIR COMPRESSOR HOSE 7.5 METRE LONG WITH ONE END BLANK , THE OTHER HAS STANDARD 1/4 NPT AIR PRESSURE MALE END CRIMP FITTED + MALE SCREW ON NITTO PROFILE FITTING + BARBED NITTO PROFILE FITTING FOR BANK END + HOSE CLAMP

This is a snap fit extension hose or replacement hose for the DR AIR PRO FLOW 150L compressor , the hose is reinforced and flexible rated up to 300 psi so will comfortably handle the compressor's output , the machine crimped male threaded end is ready to accept the male screw on fitting that clips straight into the Pro Flow's existing outlet , there is also a female barbed end fitting that fits into the blank end of the hose and a hose clamp to seal the hose to the fitting. We do not assemble the hose as some buyers may not require the full 7.5 metre length , so the blank end can be cut off to length .We also recommend using thread tape or an equivalent sealant ( not supplied ) on the threaded end to remove any leaks between the threaded hose end and the male fitting .