TRADE PACK DUAL BATTERY TRAY SUIT MITSUBISHI PAJERO 4th GENERATION 11/2006 - PRESENT 3.2 & 2.8 LITRE DIESEL , 3.5 & 3.8 PETROL ENGINES MODEL P/N WBTY008 AUSTRALIAN MADE
NEW AND IMPROVED SECOND GENERATION TRAY !
UPGRADE FEATURES INCLUDE:
1, Attractive silver non corrosive plating treatment: Though more expensive than the "gold" colored finish or powercoated finish to produce , This tray looks ( in our opinion ) far better in the engine bay and does not chip like powder coated or painted trays with no compromise to the corrosion resistance.
2, Rounded corners on tray folded returns: We have had feedback that while either installing battery trays themselves ( not only ours but also others ) or while trying the manouver the battery into the tray , that the sharp "corners" of the folded returns of the tray have scratched the battery or the person fitting it , so to eliviate this we have rounded corners on tray folded returns during the manufacturing process.
3, Longer hold down bolts: As many batteries vary in size vertically and may have obstructions such as caps or vents in the top that require a longer bolt ( either one or both ) , we now supply longer 248mm bolts* with 92mm of thread that overcome this problem.*Note: These bolts will require shortening as the way they are supplied they are too long and will come into contact with the inside of the bonnet or the insulation attached to the underside of the bonnet if left at their supplied length.
4, Bigger diameter hold down bolts: A major flaw in many battery trays is too smaller diameter hold down bolts that can fracture or bend when tightened up .We have upgraded the bolt diameter from 4.5 to 6.5mm to overcome this.
This tray is mounted in the passenger side rear of the engine bay .
NOTE: This tray will not fit NP Series 3.8Ltr V6 Exceed with Dual Air Conditioning. The charcoal cannister requires relocation to the opposite side and hoses lengthened. Cruise Control requires relocation to supplied bracket. If vehicle is fitted with L.P.Gas then extra fabrication and time may be needed.
These are a generic branded trade grade battery tray kit. Each model tray goes through stringent engineering, prototype development and vigorous off road testing before being offered to market. Each tray is made from plated steel with high sides, top mounts and a pressed base. Plated steel is resistant to corrosion, relatively light and provides extra strength and support for long term reliability. Each design is created to provide the maximum possible battery size while maintaining strength to keep the battery in place, even through the toughest 4WD conditions.
- Tray fits Pajero 3rd Gen - NM to NP 05/2000 to 10/2006 4M40 - 2.8Ltr & 4M41 - 3.2Ltr Diesel; 6G74 - 3.5Ltr & 6G75 - 3.8Ltr V6 Petrol *This tray will not fit NP Series 3.8Ltr V6 Exceed with Dual Air Conditioning. The charcoal cannister requires relocation to the opposite side and hoses lengthened. Cruise Control requires relocation to supplied bracket. If vehicle is fitted with L.P.Gas then extra fabrication and time may be needed.
- This tray is not recommended to self fit unless you have extensive mechanical experience.
- Instructions are included for the items installation including images where necessary.
- If in doubt about the right tray to purchase for you vehicle contact us first and we will assist.
REMEMBER WE OFFER FREE SECURED SHIPPING WITH TRACKING ON THIS ITEM
|Unit Of Measure||ea|
Be The First To Review This Product!
Help other AUTOELEC users shop smarter by writing reviews for products you have purchased.