GENUINE PIRANHA DUAL BATTERY TRAY SUIT TOYOTA PRADO 150 SERIES* WITH THE 2.8 LITRE TURBO DIESEL ENGINE FROM LATE 2015** ONWARDS p/n BTP150D2.8
*NOTE: This may not suit some Kakadu models
**NOTE: 8/2015 on Toyota Prado GDJ150 with 1GDFTV 2.8L 4 Cyl turbo diesel
This tray is mounted in the drivers side front of the engine bay. This tray accepts a 12" (305mm x 175mm app) battery and is specifically designed for an Exide ED5 or EXIDE ST27DC95 deep cycle battery, though others will fit.
Piranha off road have been making battery trays here in Australia for many years. Each model tray goes through stringent engineering, prototype development and vigorous off road testing before being offered to market.Each tray is made from plated steel with high sides, top mounts and a pressed base. Plated steel is resistant to corrosion, relatively light and provides extra strength and support for long term reliability. Each design is created to provide the maximum possible battery size while maintaining strength to keep the battery in place, even through the toughest 4WD conditions. A Piranha Battery Tray is the start to setting up your dual battery system.
Instructions are included for the items installation including images where necessary and Piranha or Ourselves are more than happy to assist with any further technical / installation enquiries. FOR A COPY OF THE FITTING GUIDE GO TO http://www.piranhaoffroad.com.au/library/publication/document/btp150d2_8c.pdf
If in doubt about the right tray to purchase for you vehicle contact us first and we will assist.
1x Special Top Mount
2x J bolt ( 1x extra long )
1x XBTBP Backing plate
3x M6 Wizlock nuts
4x M6 Bolts 15mm
1x M6 x 26mm Body Washer
1x M6 Bolt 30mm
1x M6 Nut
|Unit Of Measure||ea|
Be The First To Review This Product!
Help other AUTOELEC.COM.AU PTY LTD users shop smarter by writing reviews for products you have purchased.