AS THEIR LOGO SAYS "WICKED SMART CHARGERS" AND THEY REALLY ARE !!
GENIUS SECOND GENERATION SERIES BY NOCO DIGITAL FULLY AUTOMATIC 1.1 AMP 12 VOLT 4 MODE 8 STAGE MULTI STAGE BATTERY CHARGER WITH SWITCHABLE 6 OR 12 VOLT CHARGE VOLTAGE & SWITCHMODE TECHNOLOGY.
NOW COMPATIBLE TO CHARGE LITHIUM BATTERIES AS WELL AS AGM , SLA AND WET CELL BATTERIES
* NOTE This is Australian specification stock manufactured by Noco for our 240 volt mains power with full Ctick certification.
- G1100 Charger
- Accessory Quick Connect lead for maintenance charging of batteries via battery clamps which can be removed to provide instead Accessory Quick Connect Eyelet lead for permanent fitting of leads to a battery in "hard to get at" terminal locations.
- Owners Manual and User Guide
The G1100 is best for small battery applications from 2.2 - 40Ah, such as charging your Motorcycle, ATV, Jet Ski or Snowmobile. In addition to charging, the G1100 can effectively maintain any 6V or 12V batteries in larger applications, such as Cars, RVs, Boats and Trucks.
Although they often appear to be a better economic choice for the typical consumer, trickle chargers do not have the advantage of sophisticated microprocessor electronic control. What appears to be a cost savings for the charger may actually cost several times the charger price in replacement batteries. This is the difference between the GENIUS 7 stage and the other 2 step Lead Acid Chargers.Thanks to the first step ( time controlled charge). This helps activate the battery status and wake up a weak or flat battery to a suitable recharging level. This improves the battery life and in turn helps to save the environment. The batteries are protected from overcharging as well.
Step 1: Analyse
Checks the battery voltage to make sure battery connections are good and the battery is in a stable condition before beginning the charge process.
Step 2: Diagnose
Intuitive visual diagnostic tool for detecting reverse polarity, low-voltage or damaged batteries
Step 3: Recovery
Initializes the Recovery process, if needed, for deeply discharged or sulfated (desulfation) batteries by pulsing small amounts of current.
Step 4: Soft Start
Begins Bulk charging process with a gentle (soft) charge.
Step 5: Bulk
The Bulk charging process continues and returns 80% of the battery capacity. Indicated by the 25%, 50% and 75% CHARGE LEDs.
Step 6: Absorption
Brings the charge level to 90%. The battery charger will deliver small amounts of current to provide a safe, efficient charge and limit battery gassing.
Step 7: Trickle
Battery is fully charged and ready to use, indicated by the 100% CHARGE LED being a solid Green. In this step, the battery charger will only deliver enough current that the battery needs. If the battery tells the charger that more current is needed, the battery charger will switch to Maintenance.
Step 8: Maintenance
Continuously monitors the battery voltage to determine if a maintenance charge should be initiated. If the terminal voltage falls below 6.4V (6V) and 12.8V (12V), the charger will start the Maintenance cycle until voltage reaches 7.2V (6V) and 14.4V (12V) and then discontinues the charge cycle. The cycle between Trickle and Maintenance is repeated indefinitely to keep the battery at full charge, without overcharging. The battery charger can be left connected indefinitely.
|Suitable for Charging Lead Acid , Gel , AGM and Maintenance Free Batteries and LITHIUM|
|Charge 6 & 12 Volt Batteries 2 Modes for Each Voltage|
|8 Stage Charging – Diagnostics, Recovery, Soft Start, Bulk, Absorption, Trickle and Maintenance|
|Quick Connect DC Clamps and Eyelet Connectors|
|Led Charge Indicators for Mode Selected and Battery Charge Level|
|Reverse Polarity Protection|
|Simple 6 Volt / 12 volt switchable output|
|Input Voltage||220 - 240 VAC|
|Input Current||350 mA RMS Max|
|Nominal Output Voltage||7.2 VDC or 14.4 VDC Norm|
|7.4 VDC or 14.7 VDC Cold / AGM|
|Output Current||1.1 AMPS (1100 mA) DC Max|
|Charge Algorithm||Soft Start. Bulk, Absorption, Float|
|Battery Capacity Charge Range||2.2 - 40 ah|
|Operating Temperature||0°C to + 40°C Auto Compensation|
|Suitable Battery Types||STD Lead Acid/MF/GEL/AGM AND LITHIUM|
|Short Circuit Protection||Yes|
|Reverse Polarity Protection||Yes|
|Battery Over Voltage Protection||Yes|
|Charger Over Heat Protection||Yes|
|Dimensions Main Body
Ac Lead In
Dc Lead Out Clamps
|155 x 63 x 40 mm
REMEMBER WE OFFER FREE SECURED SHIPPING WITH TRACKING ON THIS LISTING
|Unit Of Measure||ea|
Be The First To Review This Product!
Help other AUTOELEC.COM.AU PTY LTD users shop smarter by writing reviews for products you have purchased.