KUN26 DUAL BATTERY TRAY FITS TOYOTA HILUX 1KD-FTV 3L DIESEL KUN25 4.0L V6 05-15

FREE FAST SECURED SHIPPING * TRADE PACK * HIGH QUALITY

SKU: WBTY001-AAA

$97.00
In Stock


Calculate Shipping

TRADE PACK DUAL BATTERY TRAY SUIT TOYOTA HILUX 2005 - APRIL 2015, TURBO DIESEL, V6 PETROL & 1KD-FTV 3.0 LITRE DIESEL, ALL WITH MANUAL AND AUTOMATIC TRANSMISSIONS MODEL P/N WBTY001 AUSTRALIAN MADE

NEW AND IMPROVED SECOND GENERATION TRAY !
UPGRADE FEATURES INCLUDE
:
1, Attractive silver non corrosive plating treatment: Though more expensive than the "gold" colored finish or powercoated finish to produce , This tray looks ( in our opinion ) far better in the engine bay and does not chip like powder coated or painted trays with no compromise to the corrosion resistance.

2, Rounded corners on tray folded returns: We have had feedback that while either installing battery trays themselves ( not only ours but also others ) or while trying the manouver the battery into the tray , that the sharp "corners" of the folded returns of the tray have scratched the battery or the person fitting it , so to eliviate this we have rounded corners on tray folded returns during the manufacturing process.

3, Improved top bracket: Along with the tray now having rounded corners , we have also rounded the corners of the top bracket and manufactured a one piece attachment to the top bracket ( see picture ). Instead of the two piece welded attacment to the top bracket , this in turn increases strength of the battery tray when mounted and reduces fatigue where the welded point was previously.

4, Longer hold down bolts: As many batteries vary in size vertically and may have obstructions such as caps or vents in the top that require a longer bolt ( either one or both ) , we now supply longer 248mm bolts* with 92mm of thread that overcome this problem.*Note: These bolts will require shortening as the way they are supplied they are too long and will come into contact with the inside of the bonnet or the insulation attached to the underside of the bonnet if left at their supplied length.

5, Bigger diameter hold down bolts: A major flaw in many battery trays is too smaller diameter hold down bolts that can fracture or bend when tightened up .We have upgraded the bolt diameter from 4.5 to 6.5mm to overcome this.   

6, Updated Computer mounting bracket: Given the model series that this tray fits has been out so long , many changes to the vehicle have occured over that time. We have researched this and manufactured a computer module mounting bracket with the most popular universal size and hole locations all predrilled*. *Note: Some versions ( Deluxe / limited editions / grey imports ) of the Hilux may still require the mounting holes for the computer that is mounted to this bracket to be further redrilled or slotted and possibly the bracket still not big enough , which would require the bracket to be extended, this is because there is variation in the distance of the mounting holes of the computer over the model series.

Note: Also check the size battery you can fit in where the tray will be located as there can be optional modules in some models installed in this area that will either require relocation or a smaller battery , or the recommended battery a tight fit.

This tray is mounted in the passenger side rear of the engine bay. This tray accepts a 12"( 303mm x 173mm app) battery such as an Exide ED5 deep cycle battery or Exide ST27DC95 , OPTIMA D27 , though others will fit.

TO VIEW AN AGM DEEP CYCLE 110AH battery that will fit this tray for HIGH TEMPERATURE under bonnet use CLICK HERE

These are a generic branded trade grade battery tray kit but manufactured to the highest standard here in Australia . Each model tray goes through stringent engineering, prototype development and vigorous off road testing before being offered to market. Each tray is made from plated steel with high sides, top mounts and a pressed base. Plated steel is resistant to corrosion, relatively light and provides extra strength and support for long term reliability. Each design is created to provide the maximum possible battery size while maintaining strength to keep the battery in place, even through the toughest 4WD conditions.

FEATURES
  • Tray fits all Toyota Hilux models from 2005 - 2014.
  • This tray is not recommended to self fit unless you have extensive mechanical experience.
  • Instructions are included for the items installation including images where necessary.
  • If in doubt about the right tray to purchase for you vehicle contact us first and we will assist.

TO VIEW AN AGM DEEP CYCLE 110AH battery that will fit this tray for HIGH TEMPERATURE under bonnet use CLICK HERE

REMEMBER WE OFFER FREE SECURED SHIPPING WITH TRACKING ON THIS LISTING 

(WBTY001-AAA)

SKU WBTY001-AAA
Brand OWL
Shipping Weight 1.9000kg
Unit Of Measure ea

Be The First To Review This Product!

Help other AUTOELEC users shop smarter by writing reviews for products you have purchased.

Write a product review


Others Also Bought



More From This Category