PROJECTA HDBC20 AUTOMATIC & MANUAL 6/12/24V 12A 2 STAGE WORKSHOP CAR TRUCK AND TRACTOR BATTERY CHARGER WITH 50A (AT 12V) ENGINE START


With plenty of power, engine start function and the ability to charge 6, 12 or 24V batteries, it is perfectly suited to mechanical workshops and auto electricians.

, ,, , , ,, ,, , , ,, ,, ,, , , ,, ,, , , ,, ,, ,, , , ,, ,, , , ,, ,, ,, ,, , , ,, ,, ,, ,, , , ,, ,, ,, ,, , , ,, ,, ,, ,, , , ,, ,, ,, ,, , , ,, ,, ,, ,, , , ,, ,, ,, ,, , , ,, ,, , , ,, ,, ,, , , ,, ,, , , ,, ,, ,, , , ,, ,, , , ,, ,, ,, , , ,, ,, , , ,, ,, ,, , , ,, ,, , , ,, ,, ,, , , ,, ,, , , ,, ,, ,, , , ,, ,, , , ,, ,, ,, , , ,, ,, ,, , , ,, ,, ,, , , ,, ,, ,, , , ,, ,, ,, , , ,, , , ,, ,, ,, , , ,, ,, ,, , , ,, ,, ,, , , ,, ,, ,, , , ,, ,, ,, , , ,, ,, ,, ,, , , ,, ,, ,, ,, , , ,, ,, ,, ,, , , ,, ,, ,, , , ,, ,, ,, , , ,, ,, ,, ,, , , ,, ,, ,, ,, , , ,, ,, ,, ,, , , ,, ,, ,, , , ,, ,, ,, , , ,, ,, ,, ,, , , ,, ,, ,, ,, , , ,, ,, ,, ,, , , ,, ,, ,, , , ,, ,, ,, ,, , , ,, ,, ,, ,, , , ,, ,, ,, ,, , , ,, ,, ,, , , ,, ,, ,, , , ,, ,, ,, ,
FEATURES
 Automatic Charging
  When in automatic mode the charger will stop charging the battery when the battery is fully charged. You can leave the charger connected to the battery without risk of overcharging. Once the battery is full, the battery charger will automatically start to maintain the battery. The charger monitors the battery voltage and continues to top up the battery, keeping it fully charged and ready for use.
 Manual Charging
  The charger in this mode will continue to charge the battery until the timer finishes or is turned off and requires the user to monitor the charging battery. When used by experienced users it can deliver an equalization charge to balance the voltage in the battery’s cells.
 LED Indication
  OVERLOAD (Red LED Flashing): The LED will flash when the transformer or the current regulators (SCR’s) have got too hot
  POWER ON (Red LED ON):The LED comes on when connected to power and the charger is switched on
  POWER ON (Red LED Flashing):Indicates that the battery clamps have been connected in reverse polarity
  Charging (Orange LED on):The LED comes on indicating charging
  Fully charged (Green LED on):The LED comes on when the battery is charged
  VOLT (Red LED ON):The LED indicates that Voltage is being displayed
  AMP (Red LED ON):The LED indicates that Amps or current is being displayed
 LED Voltage/Amp Display
  The charger has a VOLT and AMP meter built in. When the charger is initially powered up the display will show voltage. When the VOLT / AMP button is pressed the Amps will be displayed, press the button again the display will go back to Volts. When Volts is displayed this indicates the state of charge of the battery, when Amps is displayed this indicates how much charge is being accepted by the battery.
 Override Button
  The battery charger measures the battery voltage at the clamps to determine if the battery is correctly connected. A reading above 3V will activate the battery charger. In some instances where the battery is extremely flat, it is possible to have correct connection and the battery to be below the 3V limit. In this instance check the battery leads to ensure they are connected correctly and press the OVERRIDE button to activate the battery charger.
 Multi Voltage
  Suitable for charging 6V, 12V & 24V batteries.
 Engine Start
  If you need to get going and the battery is flat then the engine start will help you out. Connect the charger to the battery, set it to engine start mode for 5 minutes, then start your engine.
 0–14 Hour timer
  Automatically turns the battery charger off after a set time. The timer has 1 hour intervals with a maximum of 14 hours. This switch can also be set to permanently ON.
 Toroidal Transformer
  Using the latest technology in transformer design, toroidal transformers don’t use a solid iron core (like traditional transformers) making them lighter and more compact. They deliver more power than a traditional transformer charger of the same size.
 Protection features
  The charger is fitted with the following protection features:
  1. Reverse polarity protection – Where the battery leads are connected incorrectly the charger will flash the power LED and not charge the battery.
  2. Short circuit protection – There is no voltage at the leads until the battery clamps are connected to the battery.
  3. Overload protection – To prevent damage to the electronics the charger will switch off when overloaded, it will automatically reset when safe. The overload LED will flash in these times.
   
SPECIFICATIONS
 Type:Manual and Automatic
 Input:240VAC 50HZ
 Input power:1.35A (324W)
 Output Voltage: (Nominal)6VDC / 12VDC / 24VDC
 Output Current: (Continuous) 
  6VDC12A
  12VDC12A
  26VDC7.7A
 Suitable for charging6V, 12V, 24V, lead acid batteries (motorbikes, small to large cars, trucks and tractors)
 Battery Range: 
  CCA450–1200
  MCA600–1400
  Ah65–160
 Minium Start Voltage:0V
 Cut Out Voltage: 
  6V7.1V
  12V14.2V
  24V28.4V
 Cut In Voltage: 
  6V6.7V
  12V13.4V
  24V26.8V
 Output lead specifications:6mm2 cable
 Size:301x264x161mm
 Weight:8.6kg

REMEMBER WE INCLUDE FREE FAST SECURED SHIPPING WITH TRACKING ON THIS LISTING

 

 

SKU HDBC20
Barcode # 9315219802804
Brand Projecta
Shipping Weight 10.2000kg
Unit Of Measure ea
Type Jump Starters

Be The First To Review This Product!

Help other Autoelec users shop smarter by writing reviews for products you have purchased.

Write a product review