Redarc 52Mm Egt Exhaust Temperature Pyro Pyrometer , Boost Vacuum Gauge G52Eu
FAST SECURE SHIPPING * 100% GENUINE PRODUCT
Make 4 payments of $107.25 over 8 weeks and get it now!
GENUINE REDARC 52MM EGT ( EXHAUST GAS TEMPERATURE ) & BOOST / VACUUM PRESSURE GAUGE , BRAND NEW IN BOX WITH FULL NATIONWIDE 2 YEAR WARRANTY MODEL P/N G52-EU
Tailored to meet the requirements of 4WD and camping enthusiasts. REDARC gauges are ideal for monitoring vehicle health like battery voltage, current draw, exhaust gas temperature (EGT), manifold boost and vacuum pressure, oil pressure and a range of temperature applications such as outside, cabin, oil, water, coolant and fridge temperatures.
This extensive range of LCD/LED gauges are Australian made and combine dual or triple functions in the one 52mm gauge. With twelve variants to choose from, each has a choice of thirteen custom backlight colours, programmable alert levels as well as relay output and peak hold functions on all
variants except voltage gauges. Simple to install and operate, REDARC also offer a range of optional sensors, mounting solutions and accessories ( Click on the link at the bottom of the listing for range of Redarc gauge Accessories ).
Video shows the colours available (not gauge for sale)
REDARC G52-EU GAUGE is used to monitor the exhaust gas temperature (EGT) of turbo equipped vehicles in conjunction with a pyrometer probe. EGT is an indication of how hot the combustion process is in a vehicles cylinders. Excessive EGT can cause engine or turbocharger damage. Many conditions can result in excessive EGT (i.e. too much fuel or not enough air) and are made worse when a vehicle is pulling a heavy load, climbing or running at continuous high speeds.
The vacuum feature shows the difference between outside atmospheric pressure and the amount of vacuum present in the intake manifold. This gauge gives you a guide to the engine’s mechanical health. It can give you information about problems such as engine rings, valves, leaking intake manifold gaskets, etc. By monitoring boost, you are also able to keep the vehicle's engine components in the proper power range to achieve the most performance from your vehicle.
The gauge is supplied with a “K” type EGT sensor and electronic boost MAP sensor interface. The boost/ vacuum has a peak hold function with a display range from -12 to 23 PSI and programmable alert level between -10 and 10 PSI. The EGT function also has a peak hold function with a range from 0 to 1,000°C and is programmable between 500 and 800°C. The EGT probe has a 1/8” NPT compression fitting and is supplied with a weld in mounting bung.
The G52-EU gauge diameter requires a 52mm hole for mounting. REDARC offer a range of mounting solutions including a 2” black plastic mounting cup (GH-CUP) and one (GH-MP1), two (GH-MP2) and three (GH-MP3) hole gauge mounting panels. Radio inserts are also available that suit the Toyota Hilux (GH-RI05).
2.5” (GMC-2.5) and 3.25” (GMC-3.25) muffler clamps are also available from REDARC to hold the EGT probe.
The REDARC 24 to 12-volt adaptor (GA-2412V) can be used to connect this gauge to a vehicle with a 24-volt ignition and lighting supply.
- Satin Chrome Bezel
- 13 Selectable Backlight Colours
- EGT and boost peak hold functions
- Multiple programmable alert levels with amber or red backlight and audible beep
- Display illuminates when park lights are turned on so you can check battery voltages and discharge or charge current without turning on the ignition.
- If fitting more than one REDARC gauge, a communications link can be connected between the gauges to change the backlight colour of all at once ( not included in this listing ).
- 52mm gauge with wiring harnesses for power/programming and connection to sensor interface
- MAP Sensor interface box
- Diesel EGT pyrometer probe with 1/8” NPT compression fitting and 96” lead wire.
- 1.8m Hose with T-Piece to tap into vehicle’s manifold boost/vac hose
- K-Type thermo coupler
- Weld in mounting bung
- Mounting bracket with fasteners and P-Clip
TO VIEW THE INSTRUCTION MANUAL
REDARC offer a range of mounting solutions including a 2” black plastic mounting cup (GH-CUP) and one (GH-MP1), two (GH-MP2) and three (GH-MP3) hole gauge mounting panels. Radio inserts are also available for the Toyota Hilux (GH-HILUXR05).2.5” (GMC-2.5) and 3.25” (GMC-3.25) muffler clamps are also available from REDARC to hold the EGT probe. The REDARC 24 to 12 Volt adaptor (GA-2412V) can be used to connect this gauge to a vehicle with a 24 volt ignition and lighting supply. ( Click on the below link for range of Redarc gauge Accessories )
TO VIEW THE RANGE OF REDARC GAUGES AND ASSOCIATED ACCESSORIES
|Unit Of Measure||ea|
Be The First To Review This Product!
Help other Autoelec users shop smarter by writing reviews for products you have purchased.