WBTY009 TRADE PACK DUAL BATTERY TRAY SUIT TOYOTA LANDCRUISER 70 SERIES FITTED WITH V8 TDI DEISEL ENGINE WITH 2 VARIATIONS OF THE ABS RELOCATION PLATE SUIT NON ABS , EARLY WITH ABS AND LATE MODELS WITH ABS.
This battery tray fits all 70 Series V8 TDI DIESEL Landcruisers equipped with or without ABS Braking. The brackets supplied ( if required ) re-mounts computers to inner guard. We recommend the use of a fully sealed battery due to the mulit-pin plug located below tray. The special top mount support brackets must be used.
TO VIEW A SEALED AGM DEEP CYCLE 110AH battery that will fit this tray for HIGH TEMPERATURE under bonnet use CLICK HERE
These are a generic branded trade grade battery tray kit . Each model tray goes through stringent engineering, prototype development and vigorous off road testing before being offered to market. Each tray is made from plated steel with high sides, top mounts and a pressed base. Plated steel is resistant to corrosion, relatively light and provides extra strength and support for long term reliability. Each design is created to provide the maximum possible battery size while maintaining strength to keep the battery in place, even through the toughest 4WD conditions.
NEW AND IMPROVED SECOND GENERATION TRAY !
UPGRADE FEATURES INCLUDE:
1, Attractive silver non corrosive plating treatment: Though more expensive than the "gold" colored finish or powercoated finish to produce , This tray looks ( in our opinion ) far better in the engine bay and does not chip with no compromise to the corrosion resistance.
2, Rounded corners on tray folded returns: We have had feedback that while either installing battery trays themselves ( not only ours but also others ) or while trying the manouver the battery into the tray , that the sharp "corners" of the folded returns of the tray have scratched the battery or the person fitting it , so to eliviate this we have rounded corners on tray folded returns during the manufacturing process.
3, Improved top bracket: Along with the tray now having rounded corners , we have also rounded the corners of the top bracket and manufactured a one piece attachment to the top bracket ( see picture ). Instead of the two piece welded attachment to the top bracket , this in turn increases strength of the battery tray when mounted and reduces fatigue where the welded point was previously.
4, Longer hold down bolts: As many batteries vary in size vertically and may have obstructions such as caps or vents in the top that require a longer bolt ( either one or both ) , we now supply longer 248mm bolts* with 92mm of thread that overcome this problem.*Note: These bolts will require shortening as the way they are supplied they are too long and will come into contact with the inside of the bonnet or the insulation attached to the underside of the bonnet if left at their supplied length.
5, Bigger diameter hold down bolts: A major flaw in many battery trays is too smaller diameter hold down bolts that can fracture or bend when tightened up .We have upgraded the bolt diameter from 4.5 to 6.5mm to overcome this.
TO VIEW AN AGM DEEP CYCLE 110AH battery that will fit this tray for HIGH TEMPERATURE under bonnet use CLICK HERE
Instructions are included for the items installation as pictured.
This tray is not suitable to self fit unless you have extensive mechanical and electrical experience.
Instructions are included for the items installation including images where necessary.
If in doubt about the right tray to purchase for you vehicle contact us through eBay first and we will assist.
Please note: The instructions provided with this product has a typo on the size of the internal dimensions of the plate please ignore this.
REMEMBER WE OFFER FREE SECURED SHIPPING WITH TRACKING ON THIS LISTING
|Unit Of Measure||ea|
Be The First To Review This Product!
Help other AUTOELEC.COM.AU PTY LTD users shop smarter by writing reviews for products you have purchased.